"How to Do More With Your Blind-hem Foot! Part Three: Edge-joining"

Edge-joining is used to attach "insertions" (ribbons made of lace), ribbons etc. to each other or to fabric with a zigzag stitch. While you can do it with a set blind-hem foot like mine, you can get a better result if you use an adjustable blind-hem foot because you can put the guide in the centre.

How to Use Your Blind-hem Foot as an Edge-stitching Foot

But each of your two pieces of fabric up against the guide on the foot. You may like to hem them first, or to hem the fabric before you join it to an insertion or a ribbon.

Set your zigzag to a width that will catch and hold securely both pieces of fabric. I used 5.5mm wide. Then just stitch, keeping the two pieces butted against the guide as you go.

If you have an adjustable blind-hem foot, you will be able to use a narrower zigzag, but I had to use a wide stitch so as to miss the guide with the needle.

You could also use an over-locking stitch on your sewing machine. If you are going to use a fancy stitch, move the balance wheel by hand for the whole of the first stitch to make sure you won't hit the foot.

This is what my sample looks like up close:

It doesn't look very neat in the photo, but if I had used a more suitable thread, such as invisible thread, and had been able to use a narrower stitch, it would have looked better. SewBeautifulMag.com/video.html has a video showing this technique with an edge-joining foot, also known as a centre-blade-foot.

Now that you have your edges joined, you could just leave them like that, or you could put ribbon underneath, catching a bead every so often or making a bow. It's really up to you! Do you have any more ideas? Please share them below! : )

Until next time, happy sewing!
Sabrina Wharton-Brown
The Sewing Corner

P.S. Next week will conclude this series of Blind-hem Posts with instructions for Stitching-in-the-Ditch with your Blind-hem foot.

"How to Do More With Your Blind-hem Foot! Part Four: Stitch-in-the-Ditch"

If you like to sew your projects quickly, this is a great technique for waistbands, anchoring facings, and probably many other things. You can also stitch-in-the-ditch when you do machine quilting to sew the layers together. There are stitch-in-the-ditch feet available, but why buy something extra when you have a blind-hem foot to do the job already?

How to Stitch-in-the-Ditch with Your Blind-hem Foot
1) Sew the waistband onto the garment RS together. Press, then press the waistband and seam allowance upwards. If you are adding elastic, put it in now, sitting in between the seam allowance and the waistband.

2) Neaten the raw edge of the waistband. Fold down the rest of the waistband's fabric so that it covers the elastic, keeping the raw edge down. The upper photo on the left is what it looks like on the inside of the garment, and the one below it is what it looks like on the outside of the garment.

 3) With the waistband pointing towards the left, put it under the presser foot. I have it this way around because the little kink in the guide bar makes it harder to get in the ditch if it is the other way around.

Move the needle (or the guide if you have an adjustable Blind-hem foot) so that the needle goes right into the ditch. On my Brother sewing machine, this is at 2.5mm from the left on a straight stitch. Sew along the ditch until you get to the end.

If the stitch is still a little visible on the RS, slightly roll the waistband fabric down to cover it, and press.

The photos below show what it looks like when you have finished. The top photo is what it looks like from the RS. It's nearly invisible. The photo below is what it looks like on the inside of the garment. Since this is a sample, I didn't neaten the raw edge.

This technique isn't limited to waistbands. You could also use it on cuffs, or anywhere else you want a fast finish. You can also use it to apply bias binding quickly. Can you think of any other uses? Please share them below in the comments. : )

Until next time, happy sewing!

Sabrina Wharton-Brown

The Sewing Corner

"How to Do More With Your Blind-hem Foot! Part Two: Top-stitching/Edge-stitching and Pin-tucks"

Top-stitching is a very easy way to decorate your projects with only a straight stitch. It really looks best when it is neat and and even distance from the edge. With careful attention you can do it well with your standard presser foot, but it is a lot easier when you use your blind-hem foot. Note: You can also use your overcasting foot if you want to be a bit farther from the edge.

It is very easy. Just attach your blind-hem foot, but your folded edge against the guide, and with the needle to the left, stitch. And that's it.

How to Sew Pin-tucks With Your Blind-hem Foot
Since that's not a lot for one post, I'll show you how to make pin tucks with you blind-hem foot as well.

Pin-tucks are very narrow, stitched folds in fabric. If there are enough of them they can make a garment smaller, but if you only have a few, it usually won't make much difference.

Groups of pin-tucks look best when the pin-tucks are parallel, evenly spaced and very neat.

To make a pin-tuck with your blind-hem foot, first fold the fabric where you want the pin-tuck to be, then put the folded fabric under the foot with the fold butted against the guide. Then sew as usual. When you have sewn the pin tuck, sew the next one parallel to it and repeat until you have enough.

You can use these for smocking
If you baste these pin-tucks (fairly close together) instead of stitching them permanently, you can smock them and then release the basting. Smocking looks very pretty on little girls' clothes and on summer blouses. You can really smock just about any fabric, but I should think it would be easier on fabrics with a softer handle. When you smock, you can add a bead to each join. This makes a very nice evening look and can be used on bags too!

Pin-tucks are a classic and very pretty look on summer blouses and dresses. They look best in groups and can be a smart, understated trimming on work blouses and school blouses (I don't know if they are allowed on school blouses, but I don't see why not).

Different Ways to Use Pin-tucks
Pin-tucks needn't be vertical, you can sew them above a hem or anywhere else you would like horizontal lines. You can sew them in one direction and then pin-tuck over those in the opposite direction (vertical then horizontal or vice versa) to make cross pin-tucks. Or you can lay the pin-tucked fabric flat then stitch up across the pin-tucks then down across them a few inches to the left, then up again the same distance to the left and keep going on like that to get a wavy design. 365daysofsewing posted a similar technique on BurdaStyle.com http://www.burdastyle.com/techniques/how-to-sew-scallop-tucks. You can use pin-tucks as narrow dart tucks, or you can sew them on the inside of the garment for a different look.

If you are sewing very light fabric, you can sew with a cord in the tuck and then pull it up to gather. You could do this to the top of doll's house curtains or a doll's garment's waist as well. You could use shirring elastic instead of cord to make it stretchy.

If you are going to make lots of pin-tucks...
...it is best to pin-tuck the fabric before you cut it, because too many pin-tucks will naturally shorten or narrow the fabric and affect the fit. If you pin-tuck right across the width of the fabric, you can use this in the design and have the sleeves cut with pin-tucks near their hems, creating harmony in the design.

Can you think of any other ways to use pin-tucks? Please share them in the comments below!

Next week's post will be about edge-joining with the Blind-hem foot. I suggest you have a go at it rather than judging it by the photo because the photo doesn't look very good. : )

Until next time, happy sewing!
Sabrina Wharton-Brown
The Sewing Corner

P.S. I have started a page on this blog that shows some of my favourite sewing books and things. It's actually an aStore so if you would like the same things, you can get them here. It's the page link on the side bar that says "My Favourite Sewing Books and Things".